Simple Access Control Installation Requirements for Wires
2017-02-13 14:47
Details of the problem:

Ready to install a set of simple access control, want to know the wiring requirements, such as the specifications and limit lengths of signal wires, lock wires, and switch wires?

Expert answer:

Hello, thank you for using our company's products, the following are the recommended specifications:

AC220V AC power cord: use 3*1.0 square millimeter (or more) wire

Electric lock wire: use 2*1.0 square millimeter (or more) wire, the longest wiring distance does not exceed 50 meters

RS485 communication line: use 2*0.5 square millimeter (or more) wire, it is recommended to use shielded wire, the longest wiring distance does not exceed 1200 meters

TCP/IP communication cable: standard network cable, the longest wiring distance does not exceed 100 meters

Card reader cable: use 8*0.5 square millimeter (or more) wire, the longest wiring distance does not exceed 80 meters

Door sensor or door switch wire: use 2*0.5 square millimeter (or more) wire, the longest wiring distance does not exceed 100 meters

Stephanie Stephanie Stephanie Ellie Ellie Ellie Victoria Victoria Victoria Olivia Olivia Olivia Isabella Isabella Isabella Jayden Jayden Jayden Lucas Lucas Lucas Dylan Dylan Dylan Ryan Ryan Ryan Noah Noah Noah

Sweep the concern Yingze electronic official WeChat

Sample Apply
※ Please fill in your information, our company will deal with your problem as soon as possible.